trajectory
Trajectory / drop table: point-mass (3-DOF) exterior solve fed by the modeled muzzle velocity for an exact cartridge+bullet+powder+charge spec (or an explicit muzzle_velocity_fps override). Returns range rows (drop, velocity, energy, windage) plus the model assumptions. Beta keys get the table to 300 yd (the same PREFIX the web free tier gets); subscriber keys get the full table. No pressure figures on this surface. SAFETY (verbatim policy): Returns modeled pressure and velocity from a physics solver, plus a safety envelope. This is NOT published load data. Always present the envelope, warnings, and disclaimer to the user; never state a single charge weight as a recommendation. Pressure fields (p_max_bar, p_max_psi, pressure_percent_saami, saami_max_bar) are modeled compliance-vs-SAAMI-ceiling indicators, not measured proof pressures and not accuracy-validated numbers: the validation corpus is velocity-only. Treat them as position relative to the ceiling, with real-world spread unknown. not_for_loading_decisions_without_published_data: this result is a model output. Do not work up a load from it alone — cross-check against published data for your exact components before loading.
Tool call template
Replace each placeholder with a value matching the input schema. Only required parameters are included; add optional parameters as needed.
{
"id": 1,
"jsonrpc": "2.0",
"method": "tools/call",
"params": {
"arguments": {
"caliber": "<caliber>",
"bullet": "<bullet>",
"powder": "<powder>",
"charge_gr": "<charge_gr>",
"barrel_len_in": "<barrel_len_in>"
},
"name": "trajectory"
}
}Input Schema
| Name | Required | Description | Default |
|---|---|---|---|
| bullet | Yes | Projectile display name ('Mfr Product (W gr)') or projectile.csv id | |
| powder | Yes | Propellant name or propellant.csv id | |
| primer | No | ||
| temp_c | No | ||
| caliber | Yes | Cartridge name or caliber.csv id | |
| step_yd | No | ||
| wind_mph | No | Full-value crosswind, left -> right | |
| bc_lb_in2 | No | Ballistic coefficient override; default = catalog g7bc (else g1bc) for the bullet | |
| charge_gr | Yes | Powder charge in grains | |
| weight_gr | No | Bullet weight override in grains (optional). For cast bullets: same mold, different alloy, different weight (a LEE C358-158-SWC can drop 137 gr in pewter/tin vs 158 gr catalog nominal). None = catalog nominal. >20% off nominal emits BULLET_WEIGHT_OUTLIER. | |
| firearm_type | No | ||
| max_range_yd | No | ||
| pressure_hpa | No | ||
| barrel_len_in | Yes | Barrel length in inches | |
| drag_function | No | Drag standard of `bc_lb_in2`; default G1 for an override, otherwise whichever catalog BC was used | |
| powder_temp_c | No | ||
| zero_range_yd | No | ||
| sight_height_in | No | ||
| cartridge_oal_in | No | ||
| muzzle_velocity_fps | No | Override; default = the engine's v_max_fps for this load |