Pocket size for a part
preview_hardware_pocketThe exact openings Printlooper would cut for a confirmed part at given fit settings, before a design is made around it.
Tool call template
Replace each placeholder with a value matching the input schema. Only required parameters are included; add optional parameters as needed.
{
"id": 1,
"jsonrpc": "2.0",
"method": "tools/call",
"params": {
"arguments": {
"hardware_revision_id": "<hardware_revision_id>"
},
"name": "preview_hardware_pocket"
}
}Input Schema
| Name | Required | Description | Default |
|---|---|---|---|
| count | No | How many of this part | |
| mount | No | pocket keeps a floor under the part; through passes straight through a panel | |
| columns | No | Parts per row along X. Must divide the count. Default is one row. | |
| pitch_mm | No | Centre-to-centre spacing. Required for more than one part. | |
| plate_mm | No | Panel thickness for a through cutout. Through only. | |
| taper_mm | No | Entry chamfer that helps the part go in. Pockets only. | |
| clearance_mm | No | Gap per side around the part | |
| floor_hole_mm | No | Round hole through each pocket floor, for a screw or shaft. Pockets only. | |
| hardware_revision_id | Yes | revision_id from list_available_hardware |